Freedom University.TV

MODULE 1

Introduction to Circuit Analysis

Video Module 1 - Introduction.  The module covers and reviews symbols, units and variables.

Sample Video 1 - Introduction (from Module 1) 

Module 1 | Module 2 | Module 3 | Module 4

MODULE 2

BASIC CIRCUIT ANALYSIS 

Video Module 2 - Basic Circuit Analysis.  The module starts off with a discussion of element constraints and then connection constraints.  These constraints are then combined to analyze circuits.  Equivalent circuits, voltage and current division are then discussed as well as circuit reduction.

Sample Video 2 - Basic Circuit Analysis (from Module 2)

Module 1 | Module 2 | Module 3 | Module 4

MODULE 3

CIRCUIT ANALYSIS TECHNIQUES 

Video Module 3 - Circuit Analysis Techniques. This important module will advance you to generic methods when analyzing linear circuits.  The analytical concepts will give you new insight the behavior of circuits.  You will also begin with an introduction to interface circuits.    The advance concepts include:  node-voltage analysis, mesh-current analysis, linearity properties, Thevenin and Norton equivalent circuits, maximum signal transfer and interface circuit design.

Sample Video 3 - Circuit Nodal Analysis - Introduction - Part 1 (found in Learning Module 3)

Module 1 | Module 2 | Module 3 | Module 4

(Note:  After pressing the video PLAY button and to enlarge video, right click on the mouse and click on the Zoom Option.  Then click on FULL SCREEN option or other option size) 

If  this is a new topic for you, the series of videos found in Modules 1 and 2 should be viewed & understood to fully understand the sample video Module 3.  Module 1 is an introduction to the circuit variables and Module 2 covers Basic Circuit Analysis.

MODULE 4

ACTIVE CIRCUITS 

Video Module 4 - Active Circuits.  The module is not only important to electrical engineering but to other engineering disciplines as well.  An introduction to modern electronic devices and how they are modeled is given.  This discussion will be useful when you start designing OP AMP circuits that conditions the signals (e.g. amplification and level shifting) for instrumentation systems.  You will have a chance to evaluate alternative design using criteria such as the minimum parts count

Sample Video 4- Operational Amplifier Tutorial - Basic Op Amp - Part 1 (found in Learning Module 4)

Module 1 | Module 2 | Module 3 | Module 4

(Note:  After pressing the video PLAY button and to enlarge video, right click on the mouse and click on the Zoom Option.  Then click on FULL SCREEN option or other option size) 

If the op amp video sample is a new topic for you, the series of videos found in Module 3 should be viewed and understood to fully understand this sample video of Module 4.  Module 3 covers circuit analysis techniques

The content based on the above videos are difficult topics for most beginning students.  So...

• Stop staring at the static textbook and interact with multimedia content...it's the next best thing to being there when you can't attend a class for any reason
• Clear the technical mystery covered in class and review videos to reduce or eliminate anxiety and frustration before an exam 
• Not all the videos are posted on YouTube in a single channel or at other video websites.
  • Student-Friendly Service and Navigation found in Freedom University (TM) provide a convenient and logical sequence to the video content for the student...saving time and frustration in looking for specific videos. 
• Includes selected lesson notes used in the videos when you want to focus on traditionally difficult topics what is being presented and review videos often.

GREAT VALUE!

Try One-Month Trial Subscription for $19.95

OR